FREE SHIPPING OVER $99

1950s 12.5oz Selvage Denim Carpenter Work Pants

Size Guide
How to measure

1. Shoulder

Think of a line going from your armpit straight upwards to your shoulder. Measure between those two points and hold the tape measure straight.

2. Chest

The chest measurement is taken as a circumference measurement around your chest at the widest point. Stand in a relaxed posture and breathe out.

3. Sleeve

The sleeve length measurement is taken from the point of your shoulder (where you took the shoulder width measurement), following your bent arm down to where you want the sleeve to end. Bend your arm slightly when taking this measurement. This measurement is the full length of the arm.

4. Length

The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

1. Length

With the pants/trousers buttoned up, spread the pants/trousers on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

2. Waist

The waist measurement is taken as a circumference measurement around your waist just above your belly button. Stand in a relaxed posture and breathe out.

3. Thigh

Starting at the crotch seam and ending 1–2 inches below the hip area.

4. Leg Opening

Spread the pants/trousers on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

5. Seat

The seat measurements Just take a circumference measurement around your seat at the widest part and you're good to go.

6. Front Rise

With the pants/trousers buttoned up, spread the pants/trousers on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

7. Inseam

The inseam is measured from the crotch along the inner side of the leg straight down to the floor. Stand upright, do not bend the leg, and ask someone to help you take the measurement.
How to measure

1. Shoulder

Think of a line going from your armpit straight upwards to your shoulder. Measure between those two points and hold the tape measure straight.

2. Chest

The chest measurement is taken as a circumference measurement around your chest at the widest point. Stand in a relaxed posture and breathe out.

3. Sleeve

The sleeve length measurement is taken from the point of your shoulder (where you took the shoulder width measurement), following your bent arm down to where you want the sleeve to end. Bend your arm slightly when taking this measurement. This measurement is the full length of the arm.

4. Length

The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

1. Length

With the pants/trousers buttoned up, spread the pants/trousers on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

2. Waist

The waist measurement is taken as a circumference measurement around your waist just above your belly button. Stand in a relaxed posture and breathe out.

3. Thigh

Starting at the crotch seam and ending 1–2 inches below the hip area.

4. Leg Opening

Spread the pants/trousers on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

5. Seat

The seat measurements Just take a circumference measurement around your seat at the widest part and you're good to go.

6. Front Rise

With the pants/trousers buttoned up, spread the pants/trousers on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

7. Inseam

The inseam is measured from the crotch along the inner side of the leg straight down to the floor. Stand upright, do not bend the leg, and ask someone to help you take the measurement.

2 items left

DESCRIPTION
Beginning in the 1930s, between the needs of different types of work, Overall (strap pants) evolved into a pair of pants with only the lower half. These pants are generally used by trainers, miners, smelters, carpenters and other workers. The reason is that Workwear manufacturing companies also want their products to be worn on a daily basis, without having to look fully armed like Overalls.
  1. Materials: 12.5oz Selvage Denim
  2. Custom brass buttons
  3. Talon 5# Zipper
  4. Wash and dry them inside out with like colors, liquid detergent is recommended
SIZE & FIT
Model is 5' 7”, weighs 168 lbs and wears a W32

Unwashed
Size Waist Hip
IN CM IN CM
W29 29.1  74 40.9  104
W30 30.7  78 42.9  109
W31 33.1  84 44.5  113
W32 35.0  89 46.1  117
W34 37.0  94 47.6  121
W36 39.0  99 50.4  128

Unwashed
Size Front Rise Thigh
IN CM IN CM
W29 14.0  35.5 27.2  69
W30 14.6  37 28.3  72
W31 15.2  38.5 29.5  75
W32 15.7  40 30.3  77
W34 16.1  41 31.1  79
W36 16.5  42 32.3  82

Unwashed
Size Leg Opening Inseam
IN CM IN CM
W29 20.5  26 31.5  80
W30 21.3  27 31.9  81
W31 21.7  27.5 32.3  82
W32 22.0  28 33.1  84
W34 22.4  28.5 33.5  85
W36 22.8  29 34.1  86.5

One-Wash
Size Waist Hip
IN CM IN CM
W29 27.6  70 40.6  103
W30 29.1  74 42.5  108
W31 31.5  80 44.1  112
W32 33.5  85 45.7  116
W34 35.4  90 47.2  120
W36 37.4  95 50.0  127

One-Wash
Size Front Rise Thigh
IN CM IN CM
W29 13.6  34.5 26.4  67
W30 14.2  36 27.6  70
W31 14.8  37.5 28.7  73
W32 15.4  39 29.5  75
W34 15.7  40 30.3  77
W36 16.1  41 31.5  80

One-Wash
Size Leg Opening Inseam
IN CM IN CM
W29 20.1  25.5 29.5  75
W30 20.9  26.5 29.9  76
W31 21.3  27 30.3  77
W32 21.7  27.5 31.1  79
W34 22.0  28 31.5  80
W36 22.4  28.5 31.9  81
SHIPPING
Free shipping on orders $99 (U.S. dollar), Otherwise, a shipping fee of $6.99 will be charged.
Click here to see our full shipping policy.
RETURNS
BRONSON offers 30 days returning period.
Click here to see our full return & exchange policy.
* All items must be returned in unused, original condition with tags attached.
FAQ
Haven't found the answer you are looking for? Take a look at our Frequently Asked Questions or Contact Us.
x