FREE SHIPPING OVER $99

2 Tone Attached Hood Parka

Size Guide
How to measure

1. Shoulder

Think of a line going from your armpit straight upwards to your shoulder. Measure between those two points and hold the tape measure straight.

2. Chest

The chest measurement is taken as a circumference measurement around your chest at the widest point. Stand in a relaxed posture and breathe out.

3. Sleeve

The sleeve length measurement is taken from the point of your shoulder (where you took the shoulder width measurement), following your bent arm down to where you want the sleeve to end. Bend your arm slightly when taking this measurement. This measurement is the full length of the arm.

4. Length

The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

1. Length

With the pants/trousers buttoned up, spread the pants/trousers on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

2. Waist

The waist measurement is taken as a circumference measurement around your waist just above your belly button. Stand in a relaxed posture and breathe out.

3. Thigh

Starting at the crotch seam and ending 1–2 inches below the hip area.

4. Leg Opening

Spread the pants/trousers on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

5. Seat

The seat measurements Just take a circumference measurement around your seat at the widest part and you're good to go.

6. Front Rise

With the pants/trousers buttoned up, spread the pants/trousers on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

7. Inseam

The inseam is measured from the crotch along the inner side of the leg straight down to the floor. Stand upright, do not bend the leg, and ask someone to help you take the measurement.
How to measure

1. Shoulder

Think of a line going from your armpit straight upwards to your shoulder. Measure between those two points and hold the tape measure straight.

2. Chest

The chest measurement is taken as a circumference measurement around your chest at the widest point. Stand in a relaxed posture and breathe out.

3. Sleeve

The sleeve length measurement is taken from the point of your shoulder (where you took the shoulder width measurement), following your bent arm down to where you want the sleeve to end. Bend your arm slightly when taking this measurement. This measurement is the full length of the arm.

4. Length

The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

1. Length

With the pants/trousers buttoned up, spread the pants/trousers on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

2. Waist

The waist measurement is taken as a circumference measurement around your waist just above your belly button. Stand in a relaxed posture and breathe out.

3. Thigh

Starting at the crotch seam and ending 1–2 inches below the hip area.

4. Leg Opening

Spread the pants/trousers on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

5. Seat

The seat measurements Just take a circumference measurement around your seat at the widest part and you're good to go.

6. Front Rise

With the pants/trousers buttoned up, spread the pants/trousers on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

7. Inseam

The inseam is measured from the crotch along the inner side of the leg straight down to the floor. Stand upright, do not bend the leg, and ask someone to help you take the measurement.

DESCRIPTION

The pullovers appeared in the late 1930s. It features hats that look like "add-ons." Before that, they were turtlenecks. When people needed to keep their heads warm, they naturally made hats and sewed them on the t-shirts.

It's called an "ATTACHED HOOD PARKA". Since there may not be a cloth of the same color when adding a hat to it, it is very common for two different colors to appear, which is unexpectedly popular, and the manufacturer will intentionally make a hoodie with two colors colliding. But the production cycle is not too long, by the late 1950's almost disappeared.

  1. Materials: 650g Terry cloth
  2. V-neck
  3. The 'ATTACHED HOOD' style design
  4. Screen printed version / Non-printed version
SIZE & FIT
Model is 5' 8”, weighs 137 lbs and wears a 38/M

Size Shoulder Chest
IN CM IN CM
36/S 19.3  49 42.1  107
38/M 20.1  51 44.1  112
40/L 20.9  53 46.1  117
42/XL 21.5  54.5 48.0  122
44/XXL 22.0  56 49.6  126

Size Sleeve Length
IN CM IN CM
36/S 23.2  59 24.2  61.5
38/M 23.6  60 24.8  63
40/L 24.0  61 25.4  64.5
42/XL 24.6  62.5 26.0  66
44/XXL 25.2  64 26.8  68

Size Fit Height Fit Height
FT CM LB KG
36/S 5'2"-5'6" 160-173 121-143 55-65
38/M 5'5"-5'8" 168-178 143-165 65-75
40/L 5'6"-5'9" 173-182 158-180 72-82
42/XL 5'8"-6'0" 177-185 167-189 76-86
44/XXL 5'9"-6'1" 180-188 176-198 80-90
SHIPPING
Free shipping on orders $99 (U.S. dollar), Otherwise, a shipping fee of $6.99 will be charged.
Click here to see our full shipping policy.
RETURNS
BRONSON offers 30 days returning period.
Click here to see our full return & exchange policy.
* All items must be returned in unused, original condition with tags attached.
FAQ
Haven't found the answer you are looking for? Take a look at our Frequently Asked Questions or Contact Us.
x