FREE SHIPPING OVER $99

US Navy 1940s Model 1st N-1 Woolen Deck Jacket

Size Guide
How to measure

1. Shoulder

Think of a line going from your armpit straight upwards to your shoulder. Measure between those two points and hold the tape measure straight.

2. Chest

The chest measurement is taken as a circumference measurement around your chest at the widest point. Stand in a relaxed posture and breathe out.

3. Sleeve

The sleeve length measurement is taken from the point of your shoulder (where you took the shoulder width measurement), following your bent arm down to where you want the sleeve to end. Bend your arm slightly when taking this measurement. This measurement is the full length of the arm.

4. Length

The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

1. Length

With the pants/trousers buttoned up, spread the pants/trousers on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

2. Waist

The waist measurement is taken as a circumference measurement around your waist just above your belly button. Stand in a relaxed posture and breathe out.

3. Thigh

Starting at the crotch seam and ending 1–2 inches below the hip area.

4. Leg Opening

Spread the pants/trousers on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

5. Seat

The seat measurements Just take a circumference measurement around your seat at the widest part and you're good to go.

6. Front Rise

With the pants/trousers buttoned up, spread the pants/trousers on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

7. Inseam

The inseam is measured from the crotch along the inner side of the leg straight down to the floor. Stand upright, do not bend the leg, and ask someone to help you take the measurement.
How to measure

1. Shoulder

Think of a line going from your armpit straight upwards to your shoulder. Measure between those two points and hold the tape measure straight.

2. Chest

The chest measurement is taken as a circumference measurement around your chest at the widest point. Stand in a relaxed posture and breathe out.

3. Sleeve

The sleeve length measurement is taken from the point of your shoulder (where you took the shoulder width measurement), following your bent arm down to where you want the sleeve to end. Bend your arm slightly when taking this measurement. This measurement is the full length of the arm.

4. Length

The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

1. Length

With the pants/trousers buttoned up, spread the pants/trousers on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

2. Waist

The waist measurement is taken as a circumference measurement around your waist just above your belly button. Stand in a relaxed posture and breathe out.

3. Thigh

Starting at the crotch seam and ending 1–2 inches below the hip area.

4. Leg Opening

Spread the pants/trousers on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

5. Seat

The seat measurements Just take a circumference measurement around your seat at the widest part and you're good to go.

6. Front Rise

With the pants/trousers buttoned up, spread the pants/trousers on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

7. Inseam

The inseam is measured from the crotch along the inner side of the leg straight down to the floor. Stand upright, do not bend the leg, and ask someone to help you take the measurement.

5 items left

DESCRIPTION
**THE N-1 DECK JACKET FITS ONE SIZE SMALLER THAN THE TAGGED SIZE, PLEASE REFER TO OUR SIZEGUIDE FOR THE BEST FIT.**

This is a reproduction of the 1943 model 1st N-1 jacket.

The sleeves are made of wool, with gaskets and gun belts under the arms. The wool lining is light brown, which is faithful to the original version.

  1. Materials: 12.5oz Jungle Cross. 100% Cotton
  2. Lining: 75% Wool, 25% Polyester
  3. Talon Front Zipper
  4. Color: Navy
SIZE & FIT
Model 1 is 5' 8”, weighs 158 lbs and wears a 40/L

Model 2 is 5' 7”, weighs 168 lbs and wears a 40/L

Size Shoulder Chest
IN CM IN CM
36/S 17.1  43.5 41.3  105
38/M 17.7  45 42.5  108
40/L 18.5  47 44.1  112
42/XL 19.1  48.5 46.1  117
44/XXL 19.7  50 48.0  122

Size Sleeve Length
IN CM IN CM
36/S 24.0  61 24.8  63
38/M 24.4  62 25.6  65
40/L 24.8  63 26.4  67
42/XL 25.2  64 27.2  69
44/XXL 25.6  65 28.0  71

Size Fit Height Fit Weight
FT
CM LB KG
36/S 5'2"-5'6" 160-172 110-143 50-65
38/M 5'4"-5'8" 165-178 132-161 60-73
40/L 5'6"-5'9" 172-182 150-176 68-80
42/XL 5'7"-6'0" 176-184 170-194 77-88
44/XXL 5'9"-6'1" 180-188 181-209 82-95
SHIPPING
Free shipping on orders $99 (U.S. dollar), Otherwise, a shipping fee of $6.99 will be charged.
Click here to see our full shipping policy.
RETURNS
BRONSON offers 30 days returning period.
Click here to see our full return & exchange policy.
* All items must be returned in unused, original condition with tags attached.
FAQ
Haven't found the answer you are looking for? Take a look at our Frequently Asked Questions or Contact Us.
x