FREE SHIPPING OVER $99

1910s Model Retro Corduroy Vest

Size Guide
How to measure

1. Shoulder

Think of a line going from your armpit straight upwards to your shoulder. Measure between those two points and hold the tape measure straight.

2. Chest

The chest measurement is taken as a circumference measurement around your chest at the widest point. Stand in a relaxed posture and breathe out.

3. Sleeve

The sleeve length measurement is taken from the point of your shoulder (where you took the shoulder width measurement), following your bent arm down to where you want the sleeve to end. Bend your arm slightly when taking this measurement. This measurement is the full length of the arm.

4. Length

The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

1. Length

With the pants/trousers buttoned up, spread the pants/trousers on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

2. Waist

The waist measurement is taken as a circumference measurement around your waist just above your belly button. Stand in a relaxed posture and breathe out.

3. Thigh

Starting at the crotch seam and ending 1–2 inches below the hip area.

4. Leg Opening

Spread the pants/trousers on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

5. Seat

The seat measurements Just take a circumference measurement around your seat at the widest part and you're good to go.

6. Front Rise

With the pants/trousers buttoned up, spread the pants/trousers on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

7. Inseam

The inseam is measured from the crotch along the inner side of the leg straight down to the floor. Stand upright, do not bend the leg, and ask someone to help you take the measurement.
How to measure

1. Shoulder

Think of a line going from your armpit straight upwards to your shoulder. Measure between those two points and hold the tape measure straight.

2. Chest

The chest measurement is taken as a circumference measurement around your chest at the widest point. Stand in a relaxed posture and breathe out.

3. Sleeve

The sleeve length measurement is taken from the point of your shoulder (where you took the shoulder width measurement), following your bent arm down to where you want the sleeve to end. Bend your arm slightly when taking this measurement. This measurement is the full length of the arm.

4. Length

The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

1. Length

With the pants/trousers buttoned up, spread the pants/trousers on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

2. Waist

The waist measurement is taken as a circumference measurement around your waist just above your belly button. Stand in a relaxed posture and breathe out.

3. Thigh

Starting at the crotch seam and ending 1–2 inches below the hip area.

4. Leg Opening

Spread the pants/trousers on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

5. Seat

The seat measurements Just take a circumference measurement around your seat at the widest part and you're good to go.

6. Front Rise

With the pants/trousers buttoned up, spread the pants/trousers on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

7. Inseam

The inseam is measured from the crotch along the inner side of the leg straight down to the floor. Stand upright, do not bend the leg, and ask someone to help you take the measurement.

4 items left

DESCRIPTION
1910S European corduroy vests were sold to railway operators, outdoor workers, farmers, and other laborers. The focus is on warmth and protection, so the collar depth is very shallow. There is usually a pocket on the left chest, two pockets on the hem, and the placket is set at a bevel angle. This time, the vest of this type is better restored, the oblique-slip pocket that reproduces the style of the early gentleman.
  1. Materials: 360g Corduroy, 100% Cotton
SIZE & FIT
Model is 5' 8”, weighs 158 lbs and wears a 38/M

Size Shoulder Chest
IN CM IN CM
36/S 14.4  36.5 38.6  98
38/M 15.0  38 40.2  102
40/L 15.6  39.5 41.7  106
42/XL 16.1  41 44.1  112
44/XXL 16.7  42.5 45.3  115

Size Front Length Back Length
IN CM IN CM
36/S 23.4  59.5 22.4  57
38/M 24.4  62 23.2  59
40/L 25.2  64 23.8  60.5
42/XL 26.0  66 24.4  62
44/XXL 26.6  67.5 25.0  63.5

Size Fit Height Fit Weight
FT
CM LB KG
36/S 5'4"-5'7" 165-175 116-138 53-63
38/M 5'5"-5'8" 170-178 138-160 63-73
40/L 5'6"-5'9" 173-182 154-176 70-80
42/XL 5'7"-6'0" 176-184 171-198 78-90
44/XXL 5'8"-6'1" 179-187 182-209 83-95
SHIPPING
Free shipping on orders $99 (U.S. dollar), Otherwise, a shipping fee of $6.99 will be charged.
Click here to see our full shipping policy.
RETURNS
BRONSON offers 30 days returning period.
Click here to see our full return & exchange policy.
* All items must be returned in unused, original condition with tags attached.
FAQ
Haven't found the answer you are looking for? Take a look at our Frequently Asked Questions or Contact Us.
x