FREE SHIPPING OVER $99

WWII USAAF 1943 Model B10 Flight Bomber Jacket

Size Guide
How to measure

Size Guide


Sleeve

Measure from the tip of the shoulder down to the bottom of the sleeve

Shoulder

Place the measuring tape at the corner of one shoulder and pull across to the other shoulder. This is an important measurement as some people typically wear the same size but have different shoulder widths.

Chest

Measure from the bottom of one armhole across the chest to the bottom of the opposite armhole.

Length

Place the measuring tape in the middle of the collar and pull it down vertically to the bottom of the jacket.


Waist

For measuring the waist first button the jeans up. Next spread the jeans flat on the surface, and remove any fullness and wrinkles from it.

Front Rise

With the jeans buttoned up, spread the jeans on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

Thigh

Starting at the crotch seam and ending 1–2 inches below the hip area.

Length

With the jeans buttoned up, spread the jeans on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

Inseam

Having the jeans buttoned up, spread the jeans on a surface flat. Now measure the inseam gap from the crotch, at the spot where the front and back seams meet, exactly where, depends on the length you desire ultimately.

Leg Opening

Now in the last step follow the same pattern as the previous steps, that is spread the jeans on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

How to measure

Size Guide


Sleeve

Measure from the tip of the shoulder down to the bottom of the sleeve

Shoulder

Place the measuring tape at the corner of one shoulder and pull across to the other shoulder. This is an important measurement as some people typically wear the same size but have different shoulder widths.

Chest

Measure from the bottom of one armhole across the chest to the bottom of the opposite armhole.

Length

Place the measuring tape in the middle of the collar and pull it down vertically to the bottom of the jacket.


Waist

For measuring the waist first button the jeans up. Next spread the jeans flat on the surface, and remove any fullness and wrinkles from it.

Front Rise

With the jeans buttoned up, spread the jeans on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

Thigh

Starting at the crotch seam and ending 1–2 inches below the hip area.

Length

With the jeans buttoned up, spread the jeans on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

Inseam

Having the jeans buttoned up, spread the jeans on a surface flat. Now measure the inseam gap from the crotch, at the spot where the front and back seams meet, exactly where, depends on the length you desire ultimately.

Leg Opening

Now in the last step follow the same pattern as the previous steps, that is spread the jeans on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

DESCRIPTION
**THE B-10 FLIGHT JACKET FITS ONE SIZE SMALLER THAN THE TAGGED SIZE, PLEASE REFER TO OUR SIZEGUIDE FOR THE BEST FIT.**

Type B-10 is a classic jacket of the US Army Air Force. It was officially commissioned in 1943. It is a very representative combat suit of the World War II military uniform. After that, the B-15 series was derived, and the well-known MA1 was finally born. It is the predecessor of MA1. The B-10 was the main flight suit of the War Zone in World War II, and it was a reliable partner for Army pilots.

The surface of B-10 is made of fine-grain cotton fabric, with wool blended fleece inside, and the collar is made of fur, which is very warm. The two large pockets on the coat, combined with the domineering large suede collar, have affected countless men's jackets since then.

  1. 340g Sateen Cotton
  2. Materials: 100% Cotton
  3. Lining: 75% Wool 25% Polyester
  4. Collor: 100% Sheepskin
  5. Cuff: 70% Wool 30% Polyester
  6. Color: Olive Green / Khaki Green
SIZE & FIT
Model is 5' 8”, weighs 158 lbs and wears a L/40

Size Shoulder Chest
IN CM IN CM
S/36 17.3  44 42.1  107
M/38 17.9  45.5 44.1  112
L/40 18.5  47 46.1  117
XL/42 19.1  48.5 48.0  122
XXL/44 19.7  50 50.0  127

Size Sleeve Length
IN CM IN CM
S/36 24.0  61 23.6  60
M/38 24.6  62.5 24.2  61.5
L/40 25.2  64 24.8  63
XL/42 25.6  65 25.6  65
XXL/44 26.2  66.5 26.2  66.5

Size Fit Height Fit Weight
FT CM LB KG
S/36 5'3"-5'6" 163-173 121-143 55-65
M/38 5'5"-5'8" 170-178 143-165 65-75
L/40 5'6"-5'9" 173-181 154-176 70-80
XL/42 5'7"-6'0" 176-183 172-194 78-88
XXL/44 5'9"-6'1" 180-188 187-209 85-95
SHIPPING
Free shipping on orders $99 (U.S. dollar), Otherwise, a shipping fee of $6.99 will be charged.
Click here to see our full shipping policy.
RETURNS
BRONSON offers 30 days returning period.
Click here to start the return process for your order.
Click here to see our full return & exchange policy.
* All items must be returned in un-used, original condition with tags attached.
FAQ
Haven't found the answer you are looking for? Take a look at our Frequently Asked Questions or Contact Us.
x