FREE SHIPPING OVER $99

Lot 920 Old Time Stripe Pants

Size Guide
How to measure

1. Shoulder

Think of a line going from your armpit straight upwards to your shoulder. Measure between those two points and hold the tape measure straight.

2. Chest

The chest measurement is taken as a circumference measurement around your chest at the widest point. Stand in a relaxed posture and breathe out.

3. Sleeve

The sleeve length measurement is taken from the point of your shoulder (where you took the shoulder width measurement), following your bent arm down to where you want the sleeve to end. Bend your arm slightly when taking this measurement. This measurement is the full length of the arm.

4. Length

The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

1. Length

With the pants/trousers buttoned up, spread the pants/trousers on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

2. Waist

The waist measurement is taken as a circumference measurement around your waist just above your belly button. Stand in a relaxed posture and breathe out.

3. Thigh

Lay the pants/trousers and fold one leg up. Stretch and flatten the pants/trousers, and measure straight from side to side of the leg.

4. Leg Opening

Spread the pants/trousers on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

5. Seat

The seat measurements Just take a circumference measurement around your seat at the widest part and you're good to go.

6. Front Rise

With the pants/trousers buttoned up, spread the pants/trousers on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

7. Inseam

The inseam is measured from the crotch along the inner side of the leg straight down to the floor. Stand upright, do not bend the leg, and ask someone to help you take the measurement.
How to measure

1. Shoulder

Think of a line going from your armpit straight upwards to your shoulder. Measure between those two points and hold the tape measure straight.

2. Chest

The chest measurement is taken as a circumference measurement around your chest at the widest point. Stand in a relaxed posture and breathe out.

3. Sleeve

The sleeve length measurement is taken from the point of your shoulder (where you took the shoulder width measurement), following your bent arm down to where you want the sleeve to end. Bend your arm slightly when taking this measurement. This measurement is the full length of the arm.

4. Length

The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

1. Length

With the pants/trousers buttoned up, spread the pants/trousers on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

2. Waist

The waist measurement is taken as a circumference measurement around your waist just above your belly button. Stand in a relaxed posture and breathe out.

3. Thigh

Lay the pants/trousers and fold one leg up. Stretch and flatten the pants/trousers, and measure straight from side to side of the leg.

4. Leg Opening

Spread the pants/trousers on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

5. Seat

The seat measurements Just take a circumference measurement around your seat at the widest part and you're good to go.

6. Front Rise

With the pants/trousers buttoned up, spread the pants/trousers on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

7. Inseam

The inseam is measured from the crotch along the inner side of the leg straight down to the floor. Stand upright, do not bend the leg, and ask someone to help you take the measurement.

Color
Grey-brown
Size

1 item left

SIZE CHART
Model is 5' 8”, weighs 158 lbs and wears a W31

Size Waist Front Rise
IN CM IN CM
W29 28.3  72 12.8  32.5
W30 29.1  74 13.0  33
W31 30.3  77 13.2  33.5
W32 31.5  80 13.4  34
W34 34.3  87 13.8  35
W36 35.8  91 14.2  36

Size Hip  Thigh
IN CM IN CM
W29 40.9  104 13.0  33
W30 41.7  106 13.2  33.5
W31 42.1  107 13.4  34
W32 42.9  109 13.8  35
W34 44.1  112 14.2  36
W36 44.9  114 14.6  37

Size Inseam Length
IN CM IN CM
W29 28.3  72 40.6  103
W30 28.9  73.5 41.1  104.5
W31 29.5  75 41.7  106
W32 29.9  76 42.3  107.5
W34 30.3  77 42.9  109
W36 30.9  78.5 43.7  111

Size Leg Opening
IN CM
W29 8.7  22
W30 8.9  22.5
W31 9.1  23
W32 9.3  23.5
W34 9.4  24
W36 9.8  25

Size Fit Height Fit Weight
FT CM LB KG
W29 5'0"-5'5" 155-170 116-138 53-63
W30 5'2"-5'7" 160-175 127-149 58-68
W31 5'4"-5'8" 165-178 143-165 65-75
W32 5'5"-5'9" 170-181 154-176 70-80
W34 5'7"-6'0" 174-183 169-191 77-87
W36 5'8"-6'1" 178-187 187-209 85-95
DESCRIPTION

This prototype is taken from the daily pants of the European immigrants in the old times. Most of these trousers lack “YOKE”, that is, there is no triangle stitching cut under the back waist. The waist of the trousers has buttons that can be used to tie the suspender, and there is an adjustment belt in the middle of the back waist to adjust the waist and hip circumference. It’s also called “Buckleback”. From the 1920s, belt loops appear on the waist of trousers, waist buttons became dispensable and buckleback was also at stake. By the mid-1930s, buckleback was also abandoned by workwear brands,such as Levis, and since then it has gradually disappeared in the sight of the public.

It has the smooth straight lines of old style suit pants and has a good drape. Without any feeling of tightness and it’s not too wide to be uncontrollable. If you want to create a retro atmosphere, we would recommend you to try this symbolized retro item. In addition to wear together with the knitwear or leatherwear, it’s also very suitable for workwear or military uniforms.

  1. Materials: Custom-made 12oz Yarn dyed stripe fabric
  2. Classic high rise
  3. The waist hides a small pocket
  4. The wicking cloth that was commonly sewn in early customized trousers was also used for these pants
  5. Reinforcement line of the back pocket, which also has an aesthetic feeling
  6. Old style suit pants with shorter Buckleback
  7. Ingot iron button, Ingot iron Buckleback
  8. Wooden shuttle machine mark
  9. Non-shrink, Machine washable
SHIPPING
Free shipping on orders $99 (U.S. dollar), Otherwise, a shipping fee of $6.99 will be charged.
Click here to see our full shipping policy.
RETURNS
BRONSON offers 30 days returning period.
Click here to see our full return & exchange policy.
* All items must be returned in unused, original condition with tags attached.
FAQ
Haven't found the answer you are looking for? Take a look at our Frequently Asked Questions or Contact Us.
x