FREE SHIPPING OVER $99

British Army 1943 Model KD & JG Gurkha Bermuda Combat Pants

Size Guide
How to measure

1. Shoulder

Think of a line going from your armpit straight upwards to your shoulder. Measure between those two points and hold the tape measure straight.

2. Chest

The chest measurement is taken as a circumference measurement around your chest at the widest point. Stand in a relaxed posture and breathe out.

3. Sleeve

The sleeve length measurement is taken from the point of your shoulder (where you took the shoulder width measurement), following your bent arm down to where you want the sleeve to end. Bend your arm slightly when taking this measurement. This measurement is the full length of the arm.

4. Length

The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

1. Length

With the pants/trousers buttoned up, spread the pants/trousers on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

2. Waist

The waist measurement is taken as a circumference measurement around your waist just above your belly button. Stand in a relaxed posture and breathe out.

3. Thigh

Lay the pants/trousers and fold one leg up. Stretch and flatten the pants/trousers, and measure straight from side to side of the leg.

4. Leg Opening

Spread the pants/trousers on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

5. Seat

The seat measurements Just take a circumference measurement around your seat at the widest part and you're good to go.

6. Front Rise

With the pants/trousers buttoned up, spread the pants/trousers on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

7. Inseam

The inseam is measured from the crotch along the inner side of the leg straight down to the floor. Stand upright, do not bend the leg, and ask someone to help you take the measurement.
How to measure

1. Shoulder

Think of a line going from your armpit straight upwards to your shoulder. Measure between those two points and hold the tape measure straight.

2. Chest

The chest measurement is taken as a circumference measurement around your chest at the widest point. Stand in a relaxed posture and breathe out.

3. Sleeve

The sleeve length measurement is taken from the point of your shoulder (where you took the shoulder width measurement), following your bent arm down to where you want the sleeve to end. Bend your arm slightly when taking this measurement. This measurement is the full length of the arm.

4. Length

The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

1. Length

With the pants/trousers buttoned up, spread the pants/trousers on a table, floor or any other flat surface, with outseams on both corners. After removing all wrinkles and any fullness, measure the length from the top of the waistband.

2. Waist

The waist measurement is taken as a circumference measurement around your waist just above your belly button. Stand in a relaxed posture and breathe out.

3. Thigh

Lay the pants/trousers and fold one leg up. Stretch and flatten the pants/trousers, and measure straight from side to side of the leg.

4. Leg Opening

Spread the pants/trousers on a flat surface e.g. table or floor. After removing any fullness or wrinkles, start measurement beginning from one side of the leg opening to the other side of leg opening.

5. Seat

The seat measurements Just take a circumference measurement around your seat at the widest part and you're good to go.

6. Front Rise

With the pants/trousers buttoned up, spread the pants/trousers on the floor or table; next remove all wrinkles, and measure this region by starting from crotch seam spot to the spot of the waistband.

7. Inseam

The inseam is measured from the crotch along the inner side of the leg straight down to the floor. Stand upright, do not bend the leg, and ask someone to help you take the measurement.

Color
Green
Khaki
Size

1 item left

SIZE CHART
Model is 5' 8”, weighs 158 lbs and wears a Size 4

Size Length Waist
IN CM IN CM
Size 2/W28-29 43.3  110 29.1  74
Size 4/W30-31 43.7  111 31.5  80
Size 6/W31-32 44.1  112 33.1  84
Size 8/W33-34 44.5  113 34.6  88
Size 10/W35-36 44.9  114 36.2  92

Size Thigh Leg Opening
IN CM IN CM
Size 2/W28-29 13.4  34 8.9  22.5
Size 4/W30-31 13.8  35 9.1  23
Size 6/W31-32 14.0  35.5 9.3  23.5
Size 8/W33-34 14.2  36 9.4  24
Size 10/W35-36 14.6  37 9.6  24.5
DESCRIPTION
KD is the abbreviation of Khaki Drill. khaki shorts are the main battle suit of the British army in North Africa. The first generation is generally called 1941 PATTERN (or 1940). There are two adjusting belts at the waist. There are positions to increase the activity space front and back, making it more Loose and breathable. There is a small pocket on the left side for small objects. Around 1943, a tropical version of wool combat trousers was introduced with two pockets on the back. It can be said that is an upgraded version of 1941 Patten. KD color is widely used in the Mediterranean region, while JG (jungle green) is suitable for Myanmar and the Pacific region. These trousers are classic 1943 model.
  1. Materials: 12oz Custom-made Fabric, 100% cotton
  2. Color: Khaki / Green
SHIPPING
Free shipping on orders $99 (U.S. dollar), Otherwise, a shipping fee of $6.99 will be charged.
Click here to see our full shipping policy.
RETURNS
BRONSON offers 30 days returning period.
Click here to see our full return & exchange policy.
* All items must be returned in unused, original condition with tags attached.
FAQ
Haven't found the answer you are looking for? Take a look at our Frequently Asked Questions or Contact Us.
x