FREE SHIPPING OVER $99

USMC P-41 Pattern HBT Utility Jacket

Size Guide
How to measure
Shoulder:
Measure straight across the back of the shirt, from one shoulder point to the other one.

 

Chest:
Measure straight across the buttoned chest, from one armpit to the other.

 

Sleeve
With your arm bent slightly, measure from the base of your neck along your shoulder, then over your elbow to your wrist bone.

 

Length
The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

 

Waist:
The waistband is measured from side to side along the top edge. Double that number to determine the leg opening measurement.

 

Seat:
Measure the hip at 6 inches / 15cm from the top front waistband. Double that number for total seat measurement.

 

Front Rise:
The front rise is measured from the crotch seam to the top edge of the front waistband.

 

Back Rise:
The back rise is measured from the crotch seam to the top edge of the back waistband.

 

Thigh:
The thigh is measured 1" / 2.54cm below crotch seam straight across the leg. Double that number for total thigh measurement.

 

Inseam:
Measure the length from the fork (where the legs meet at the crotch) to the pant hem, follow the inside seam.

 

Length:
Measure straight from top of the waistband to the edge of the hem.

 

Leg Opening:
This is measured straight across the leg opening. Double that number to determine the leg opening measurement.

 

** Need more help? you can Contact Us to help you. **
How to measure
Shoulder:
Measure straight across the back of the shirt, from one shoulder point to the other one.

 

Chest:
Measure straight across the buttoned chest, from one armpit to the other.

 

Sleeve
With your arm bent slightly, measure from the base of your neck along your shoulder, then over your elbow to your wrist bone.

 

Length
The tops length measurement is taken from the top of the shoulder, close to the mid side of your neck, following your body down to the point where you want your tops to end.

 

Waist:
The waistband is measured from side to side along the top edge. Double that number to determine the leg opening measurement.

 

Seat:
Measure the hip at 6 inches / 15cm from the top front waistband. Double that number for total seat measurement.

 

Front Rise:
The front rise is measured from the crotch seam to the top edge of the front waistband.

 

Back Rise:
The back rise is measured from the crotch seam to the top edge of the back waistband.

 

Thigh:
The thigh is measured 1" / 2.54cm below crotch seam straight across the leg. Double that number for total thigh measurement.

 

Inseam:
Measure the length from the fork (where the legs meet at the crotch) to the pant hem, follow the inside seam.

 

Length:
Measure straight from top of the waistband to the edge of the hem.

 

Leg Opening:
This is measured straight across the leg opening. Double that number to determine the leg opening measurement.

 

** Need more help? you can Contact Us to help you. **

Color
Olive Green
Size
DESCRIPTION

The P-41 pattern was adopted by the USMC in November 1941, commonly known as P41. It was originally intended to be worn for work and training, but with the outbreak of the war, The USMC immediately put the wear-resistant and comfortable suit to use in combat, and the uniform became known as a combat uniform.

The P-41 uniforms are composed of jacket and pants. The jacket has four copper-plated metal buttons with the abbreviation of U.S. Marine Corps on the top fly of the jacket, two metal buttons and a buttonhole on the cuff, marines badge and USMC printed on the left breast, and there are pockets on each side of the waist, without pleats on the back. The overall design is very simple and bright.

The uniform was widely used throughout world War II in the Marine Corps and the Pacific Theater. As for the P44, which emerged later in World War II, it was distributed in a small number of units.

  1. This is a medium pre-washing version
  2. The marines badge and USMC printed on the left breast pocket has a mottled effect
  3. Buttons(copper) are also slightly archaic after washing the aging effect
  4. The cuffs can be tightened with two buttons and a single button hole
  5. The armhole and the side sleeve bottom are finished by double needles fell seam chain, the neat details of workwear
SIZE & FIT

Measurements reflect garment dimensions. Please use this chart as a general guide as measurements are approximate.

In order to best determine fit, it may be helpful to compare our garment’s measurements to a similar garment you already own. Lay your garment on a flat surface and take all measurements from the outside of the garment.

Click here to check out our Garment Measuring Guide.

** If you are still confused, you can Contact Us to help you choose the size. **

  1. Model 1 is 5' 8”, weighs 158 lbs and wears a 38/M
Size Shoulder Chest
IN CM IN CM
36/S 17.7  45 40.9  104
38/M 18.3  46.5 42.9  109
40/L 18.9  48 44.9  114
42/XL 19.5  49.5 46.5  118
44/XXL 19.9  50.5 48.0  122

Size Sleeve Length
IN CM IN CM
36/S 22.6  57.5 25.6  65
38/M 23.2  59 26.4  67
40/L 23.8  60.5 27.2  69
42/XL 24.4  62 28.0  71
44/XXL 25.0  63.5 28.5  72.5

Size Fit Height Fit Weight
FT CM LB KG
36/S 5'2"-5'5" 160-170 121-143 55-65
38/M 5'5"-5'9" 170-180 143-165 65-75
40/L 5'7"-6'0" 175-183 158-180 72-82
42/XL 5'8"-6'0" 178-185 171-187 78-85
44/XXL 5'9"-6'1" 180-188 176-198 80-90
SHIPPING
Free shipping on orders $99 (U.S. dollar), Otherwise, a shipping fee of $6.99 will be charged.
Click here to see our full shipping policy.
RETURNS
BRONSON offers 30 days returning period.
Click here to see our full return & exchange policy.
* All items must be returned in unused, original condition with tags attached.
FAQ
Haven't found the answer you are looking for? Take a look at our Frequently Asked Questions or Contact Us.
x